Specifications - JUKI MEB-3810N Series Instruction Manual

1. SPECIFICATIONS

Specifications
1 Application
Operating temperature
2
range
3 Operating humidity range
Number of patterns that
4
can be stored in memory
5 Input power
6
Sewing speed
7 Thread trimmer type
8 Sewing length
9 Buttonhole length
10 Needle throwing width
Length of buttonhole with
11
taper bar
12 Lift of presser foot
13 Change of stitch shape
14 Buttonhole cutting
Cloth cutting knife drive
15
method
16 Feed method
17 Needle used
18 Safety device
19 Lubricating oil
20 Air pressure
21 Air consumption
22 Machine dimensions
23 Power consumption
24 Mass
25
Noise
*1 : For the machine provided with the optional needle thread clamp unit, the buttonhole length is 10 to 28 mm.
*2 : Parallel section: Taper length can be set to such a value that does not exceed the total of the eyelet section and the
bartacking section.
*3 : The height of the completed unit differs with the height of the table stand.
J type
Jeans
35 % to 85 % (with no condensation)
99 (1 to 99) (standard patterns have been factory-numbered 90 to 99)
Single-/3-phase 200 to 240 V 50/60 Hz
Supply voltage fluctuation: Rating ± 10 %
400 to 2,500 sti/min (in 100 sti/min steps)
Needle thread Overall thread
trimmer type (00) trimmer type (01)
10 to 38 mm 10 to 34 mm
10 to 38 mm *1
10 to 28 mm
2.0 to 4.0 mm (factory-setting at the time of delivery: 2.5 mm)
[1.5 to 5.0 mm by compensation on the feed panel]
Cut-before knife + Cut-after knife, without knife
Intermittent feed by stepping motor
DO x 558 Nm90 to 120 (Needle count attached at the time of delivery: Nm110)
Pause switch & automatic stop function at the time of detection of a trouble
Hammer pressure regulator: Standard 0.35 MPa (max. 0.4 MPa)
Machine head: 382 mm (width) x 656 mm (length) x 584 mm (height)
Complete unit (Table-fixed type)
: 1050 mm (width) x 700 mm (length) x 1248 mm (height) *3 (excluding the thread stand)
Complete unit (Semi-sunken type)
: 1060 mm (width) x 790 mm (length) x 1096 mm (height) *3 (excluding the thread stand)
Machine head: Approx. 110 kg; Operation panel: Approx. 0.3 kg
- Equivalent continuous emission sound pressure level (L
A-weighted value of 82.0 dB; (Includes K
C.6.3 -ISO 11204 GR2 at 2,500 sti/min for the sewing cycle, 3.8 sec. (Pattern :
No.90).
- Sound power level (L ) ;
WA
A-weighted value of 92.5 dB; (Includes K
C.6.3 -ISO 3744 GR2 at 2,500 sti/min for the sewing cycle, 3.8 sec. (Pattern :
No.90).
– 1 –
Cotton pants, working pants
5°C to 35°C
Needle thread
trimmer type (00)
10 to 38 mm
10 to 38 mm *1
3 to 15 mm *2
Standard 13 mm
Selection by program
Driven by air cylinder
JUKI MACHINE Oil No. 18
Main regulator: 0.5 MPa
49.5 ℓ /min (11.6 cycles/min)
200 VA
Control box: Approx. 4.5 kg
= 2.5 dB); according to ISO 10821-
pA
= 2.5 dB); according to ISO 10821-
WA
C type
Overall thread
trimmer type (01)
10 to 34 mm
10 to 28 mm
) at the workstation :
pA