Connecting The Air Supply; Connecting The Regulator And The Manifold - JUKI MEB-3810N Series Instruction Manual

3-13. Connecting the air supply

(1) Connecting the regulator and the manifold

❶
[For the needle thread clamp]
❸
❹
❶
❸
❷
❷
❻
❼
❺
❽
❾
1) Connect joint ❶ of the regulator and joint ❷ of the
manifold by means of the air tube ø10 ❸.
1)-1. Connect air tube ø10 ❸ and joint ❷ of the man-
ifold by means of T-joint ❹ which has a short air
tube.
1)-2. Connect T-joint ❹ and joint ❻ of the manifold
for the needle thread clamp by means of air tube
ø10 ❼.
2) Connect joint ❽ of the cloth trimming regulator
and joint ❾ of the cloth trimming solenoid valve
by means of the air tube ø10 ❺.
– 25 –