3-18. Installing the eye protection cover and the finger guard
DANGER :
The eye protection cover and the finger guard are used to protect eyes against flying broken needle.
Be sure to use the sewing machine with them installed without exceptions.
❷
❶
❼
❺
❻
❹
❸
❾
❽
– 31 –
1) Assemble finger guard ❶ to safety plate bracket
❷ with two setscrews ❸.
Assemble finger guard ❶ equally with respect to
safety plate bracket ❷.
2) Assemble eye protection cover ❹ to safety plate
bracket ❷ with two setscrews ❺ and two washers
❻.
3) Install the assembled eye protection cover and
finger guard asm. ❼ on face plate ❾ with screws
❽.
Setscrew ❸ is an M4 hexagon socket head
cap screw and has a length of 8 mm. Set-
screw ❺ is an M4 round head screw and
has a length of 6 mm. Setscrew ❽ is an M4
round head screw and has a length of 6 mm.