Drawing Of The Table (Semi-Sunken Type) - JUKI MEB-3810N Series Instruction Manual

(3) Drawing of the table (Semi-sunken type)

In the case the semi-sunken type machine head is used, the kit for semi-sunken type (part number : 40157881)
is required. Prepare the kit simultaneously with the table.
In the case the semi-sunken type machine head is used, the table reinforcing plate (part number:
32080707）(supplied with the kit (part number: 40157881)) has to be installed without exceptions.
"3-5.(2) ① Installing the table reinforcing plate" p.
(Refer to 11.)
– 5 –