Handling The Cords - JUKI MEB-3810N Series Instruction Manual

3-11. Handling the cords

DANGER :
To prevent personal injuries caused by electric shock hazards or abrupt start of the sewing
machine, carry out the work after turning OFF the power switch and a lapse of 5 minutes or more.
To prevent accidents caused by unaccustomed work or electric shock, request the electric expert
or engineer of our dealers when adjusting the electrical components.
❹
❸
1) Bring the cords under the table into the control box.
2) Put the cord brought into the control box through
cord exit plate ❶ and fix cable clip band ❷.
❷
❶
3) Install control box lid ❸ with four setscrews ❹.
– 23 –