Setting The Cut-Before/Cut-After Knives; Setting The Number Of Stitches Of The Parallel Section; Setting The Number Of Stitches Of The Eyelet - JUKI MEB-3810N Series Instruction Manual

7-3. Setting the cut-before/cut-after knives

Before-cut
Disable
knife operates

7-4. Setting the number of stitches of the parallel section

7-5. Setting the number of stitches of the eyelet

Set whether the cut-before knife or the cut-after knife.
Set the knife number by means of –/BACKWARD key
The knife can be set within the range given in the
❼
table below.
Set value
❻
After-cut
knife operates
Set the number of stitches from the parallel section to
the bottom section of eyelet.
Set the knife number by means of –/BACKWARD key
❼
The number of stitches can be set, according to the
cutting length, using any of the stitch lengths within the
❻
range from 0.5 to 4 mm.
Example) In the case the cutting length is 21 mm, the
Set the number of stitches of the top section of eyelet.
Set the knife number by means of –/BACKWARD key
❼
The number of stitches can be set 3 to 20 stitches.
❻
− 53 −
❻ or +/FORWARD key
Cloth cutting knife operation
0 Without knife
1 Before-cut knife
2
After-cut knife
❻ or +/FORWARD key
number of stitches that can be set is 5 to 39.
When the number of stitches is small, the
sewing speed is automatically reduced.
❻ or +/FORWARD key
When the number of stitches is small, the
sewing speed is automatically reduced.
❼ .
❼ .
❼ .