Structure Of The Operation Switch; Structure Of The Operation Panel - JUKI MEB-3810N Series Instruction Manual

5. STRUCTURE OF THE OPERATION SWITCH

5-1. Structure of the operation panel

❺
❽
❼



[Table of functions of the operation panel]
No. Name
❶
Sewing LED
❷
READY key
❸
RESET key
❹
MODE key
❺
2-digit LED
❻
4-digit LED
❼
– key
❽
+ key
❾ –/BACKWARD
key
❶ ❷ ❸ ❹
  
This LED goes out when the sewing machine is in data setting state
and lights up when the sewing machine is in sewing state. The status
of the LED is changed over by the Ready key.
This key is used to change over the status between the setting state
and the sewing state.
This key is used to release the error, reset the counter or release the
threading mode.
This key is used to activate the auxiliary function mode under which
the sewing mode, operation mode, pattern copy/deletion and memory
switch are set.
This LED displays pattern No. in the normal state and displays data
number when setting the data.
This LED displays cut length in the normal state and displays content
of data when setting the data. It also displays the count value on the
counter and error number etc.
This key is used to decrement the pattern No. in the normal state and
to decrement the data number when setting the data.
This key is used to increment the pattern No. in the normal state and to
increment the data number when setting the data.
This key is used to decrement the set value of data or the count value
on the counter when setting data. It is used to move the feed backward
by one stitch in the pause state.
 
Description
– 41 –
❻

❾