8-10. Adjusting the brightness of the hand lamp
Hand lamp
❶
❺
❹
The brightness of the hand lamp can be adjusted on
the operation panel.
1) Select the memory switch operation mode.
Refer to
"13. MEMORY SWITCH" p. 101
to operate the memory switch operation mode.
2) Press – key
ory switch No. 30.
3) Press BACK key
❼ to change the set value.
The brightness can be set to one of 20 steps from 0
(total extinction) to 100 (maximum). The brightness
has been factory-set to 100 (maximum) at the time
of shipment.
After the completion of the adjustment of brightness
to an appropriate value, press READY key
❶ to confirm the setting. Then, exit the memory
switch operation mode.
❼
❻
− 72 −
❹ or + key
❺ to display mem-
❻ or FORWARD key
for how