Memory Switch; Operating Procedure - JUKI MEB-3810N Series Instruction Manual

13. MEMORY SWITCH

13-1. Operating procedure

In this step of procedure, the Memory switch setting is to be carried out.
❸
❶
❷ ❸
❶
B
❹
❺
5) The set value will not be stored in memory unless step of procedure 5) is performed in the fol-
lowing cases:
* Step of procedure 3) is carried out to change the memory switch number;
* Step of procedure 6) is carried out to terminate the memory switch setting;
* Power to the machine is turned OFF.
1) Press Mode key
❼
2) Press Ready key
❻
3) Press
Step of operation
described in 2)
4) Press –/BACKWARD key
5) When you press Ready key
C
❼
6) When you press MODE key
❻
7) Press Mode key
– 101 –
If the Sewing LED stays ON, press the
❶
Ready key
❸ to display the mode setting
screen. Press –/BACKWARD key
❼ to display "MEM".
FORWARD key
switch setting screen.
key ❹ or key ❺ to select the memory
switch number displayed on 2-digit LED B.
❼ to change the set value dis-
WARD key
played on 4-digit LED C. It is also possible to return
the set value to the standard one by pressing Reset
❷.
key
of the memory switch is stored in memory.
switch setting is finished to return to the "MEM"
display.
❸ while "MEM" is displayed
to return the screen to the normal display.
to turn it OFF.
❻ or +/
❶ to display the memory
❻ or +/FOR-
❶, the set value
❸, the memory