Installing The Regulator And The Manifold - JUKI MEB-3810N Series Instruction Manual

3-9. Installing the regulator and the manifold



❾
❸
❻
❹
❼
❷
❶
❼
❽
❺
Table-fixed type




00 type
1) Install manifold asm.  on manifold mounting plate
2) Install solenoid valve  on manifold mounting


❻
❸
❼
❹
❷
❶
Semi-sunken type
5) Attach plugs  and  to manifold asm.  at the


01 type
– 20 –
❾ with four setscrews .
plate ❾ with two setscrews .
3) Install regulator asm. ❶ on
table ❷ with two setscrews
❸ and two washers ❹.
4) Install manifold ❺ on table ❷
with two setscrews ❻, four
washers ❼ and two nuts ❽.
❼
❽
❺
locations shown in the figure at left.
Plug  is for ø4 hole and plug  is for ø6
hole.
Setscrews ❸ and ❻
are pan head screws
M5 of length 50 (mm).
Setscrews  and  are
hexagon socket head
screws M4 of length
30. Nuts ❽ are hexagon
nuts M5.