Memory Switch List - JUKI MEB-3810N Series Instruction Manual

13-2. Memory switch list

Function
No.
01 Max. sewing speed
Soft-start speed setting
02
1st stitch (Inside needle → outside needle)
Soft-start speed setting
03
1st stitch (outside needle → inside needle)
Soft-start speed setting
04
2nd stitch (inside needle → outside needle)
Soft-start speed setting
05
2nd stitch (outside needle → inside needle)
Soft-start speed setting
06
3rd stitch (inside needle → outside needle)
Soft-start speed setting
07
3rd stitch (outside needle → inside needle)
Needle thread tension at the time of thread
08
trimming
Needle thread tension at the time of stopping
10
Set position selection
12
Production counter selection
13
Selection of starting when production counter
14
is "0"
Start switch One-touch startup selection
15
Pattern data setting prohibition
16
Thread tension compensation setting pro-
17
hibition
Pattern data deletion prohibition
18
Looper thread trimming operation selection
19
Presser foot lowering at the time of returning
20
to the setting position
Description
Max. sewing speed is set
Limited speed at the sewing start of the sewing machine is
set. From inside needle to outside needle of 1st stitch
Limited speed at the sewing start of the sewing machine is
set. From outside needle to inside needle of 1st stitch
Limited speed at the sewing start of the sewing machine is set.
From inside needle to outside needle of 2nd stitch
Limited speed at the sewing start of the sewing machine is set.
From outside needle to inside needle of 2nd stitch
Limited speed at the sewing start of the sewing machine is
set. From inside needle to outside needle of 3rd stitch
Limited speed at the sewing start of the sewing machine is
set. From outside needle to inside needle of 3rd stitch
Needle thread tension at the time of trimming the needle
thread is set.
Needle thread tension at the time of trimming the looper thread
or stopping the sewing machine is set.
Position of presser when setting cloth is selected.
0 : Origin position
1 : Front position
2 : Origin when the cut-before knife is used; Sewing start
position when the cut-after knife is used/knife is not
installed
3 : Front side when the cut-before knife is used; sewing
start position when the cut-after knife is used/knife is not
installed
(Position is set at No. = 23.)
Operation of production counter is selected.
0 : Without
1 : UP counter ("＋1" per sewing cycle)
2 : DOWN counter ("－1" per sewing cycle)
Whether prohibiting starting at count value "0" when produc-
tion counter is set to DOWN counter is selected.
0 : Starting permitted even when production counter value
is "0"
1 : Starting prohibited when production counter value is "0"
Enable/disable of the startup only by means of the start
switch is selected.
0 : Presser foot is brought to the lower position by means of
the presser foot switch and the sewing machine is started
by means of the start switch
1 : Presser foot is brought to the lower position and the
sewing machine is started by means of the start switch
(The presser foot switch is also enabled.)
Whether or not the pattern data setting is prohibited is
selected.
0 : Setting is enabled
1 : Setting is prohibited (Thread tension can be set)
Whether or not the thread tension compensation value is set
under the ready state is selected.
0 : Setting is enabled
1 : Setting is prohibited
Whether or not the pattern data deletion is prohibited is
selected.
0 : Deletion is enabled
1 : Deletion is prohibited
(Only for the general thread trimming type machine) Whether
or not the looper thread trimming operation is carried out is
selected.
0 : Not performed
1 : Performed
Whether or not the feed base returns to the setting position
with the presser foot lowered after sewing is completed.
0 : The feed base returns to the setting position with the
presser foot lifted.
1 : The feed base returns to the setting position with the
presser foot lowered, and the presser foot goes up at
the setting position
2 : The feed base returns to the setting position with the
presser foot lowered, and the presser foot is brought to
the upper position at the setting position by means of the
presser foot switch.
– 102 –
Setting Setting Initial
range unit value
400 to 100
2,500
2,500 sti/min
400 to 100
600
1,200 sti/min
400 to 100
600
2,500 sti/min
400 to 100
600
2,500 sti/min
400 to 100
600
2,500 sti/min
400 to 100
600
2,500 sti/min
400 to 100
600
2,500 sti/min
0 to 200 1 0
0 to 200 1 60
0 to 3 1 0
0 to 2 1 1
0 to 1 - 1
0 to 1 - 0
0 to 1 - 0
0 to 1 - 0
0 to 1 - 0
0 to 1 - 1
0 to 2 - 0