Taking Out The Sewing Machine - JUKI MEB-3810N Series Instruction Manual

3-4. Taking out the sewing machine

DANGER :
1. The sewing machine should be taken out by a trained technician(s).
2. The sewing machine has a mass of approximately 110 kg. Four or more workers are required
to take out the sewing machine.
3. Do not apply an unreasonable force to the sewing machine until the installation of the sewing ma-
chine is completed. If such a force is applied, the sewing machine can lose its balance and can fall
alone or together with the table, resulting in personal injury or sewing-machine breakage.
4. Never connect the power plug until the installation of the sewing machine is completed in order
to protect against an accident due to an abrupt startup of the sewing machine.
❸
❹
4) Take out the sewing machine from the package, by four workers, holding the portions illustrated in the figure.
Place it on the floor.
❷ 1) Remove accessory boxes ❶ and ❷ in the direction
of the arrow.
2) Remove upper foam polystyrene ❸ in the direction
of the arrow.
3) Remove the right and left intermediate foam poly-
styrene ❹ and ❺ in the direction of the arrow.
❶
❺
Place a cardboard sheet or packing material between
the floor and the sewing machine in order to avoid
damaging the floor and to prevent the cords from
being pinched between the INT cover and the floor.
Cord
INT cover
– 8 –