Temporarily Stopping The Sewing Machine - JUKI MEB-3810N Series Instruction Manual

6-3. Temporarily stopping the sewing machine

❷
❶
❼
❻
– 45 –
■ How to stop the sewing machine
1) Press temporary stop switch ❶.
2) The sewing machine stops and "E050" is displayed.
■ How to re-start
1) While "E050" is shown on the screen, press RESET
❷ to release the error and to restore the
key
screen to the display before the occurrence of the
error.
2) Re-start the sewing machine using the start switch,
or press –/BACKWARD key
❼ and the feed mechanism
WARD key
travels forward/backward stitch by stitch.
Further, press RESET key
sewing machine to the sewing start position.
1. Operation of –/BACKWARD
key, +/FORWARD
SET key
trimming.
2. When temporarily stopping the sewing
machine during sewing and returning
the sewing machine to the start position
with RESET key
thread, cut the thread with scissors or
the like and perform the work. The work
can be performed without applying a
forced load to needle or sewing product.
Before starting the sewing machine, close
the front cover.
❻ or +/FOR-
❷ to return the
❻
❼
key or RE-
❷
cannot perform thread
❷
, draw out needle