Performing Re-Sewing - JUKI MEB-3810N Series Instruction Manual

6-4. Performing re-sewing

Sewing can be performed without cloth-opening operation of the presser foot.
❶
<Mode setting screen>
❶
<Sewing mode setting screen>
② Carry out sewing with the Presser foot switch and the Start switch. When the before-cut knife operates, the
cloth open mechanism opens after the completion of the operation of the cloth cutting knife. In the case of
the after-cut knife/without knife, the cloth open mechanism opens simultaneously with the start of sewing.
The cloth open mechanism closes upon the completion of sewing.
(2) Re-sewing mode (when the Sewing mode is set to "1")
① Press the Ready key
position selection" is set to "front", the feed bar keeps resting at the origin of the cloth cutting knife operating
position. The cloth open mechanism remains open.
② The cloth open mechanism remains open even when sewing is performed with the Presser foot switch and
the Start switch.
(3) Cloth open mode (when the Sewing mode is set to "2")
① Press the Ready key
selection" is set to "front", the feed bar travels to the near set position. The cloth open mechanism remains open.
② The cloth open mechanism remains open even when sewing is performed with the Presser foot switch and
the Start switch.
1. In the case the cloth cutting knife is not operated, knife operation should be prohibited by means
of the Knife ON/OFF key
desired" p. 48
2. To set the material setting position to the front side, refer to
of cloth" p.
Before starting the sewing machine, close the front cover.
❸
Step of operation
described in 2)
❸

❶ to retrieve the origin of the feed bar/needle bar. Even in the case "cloth set
❶ to retrieve the origin of the feed bar/needle bar. In the case "cloth set position

. Refer to
for the procedure.
76.
If the Sewing LED stays ON, press the
Ready key
1) Press Mode key
screen. Press –/BACKWARD key
❼
FORWARD key
2) Press Ready key
❻
mode setting screen.
3) Set the sewing mode to "0", "1" or "2" by pressing
–/BACKWARD key
❼.
4) Press Ready key
press Mode key
be cancelled.
5) While "oPEn" is shown on the screen, press Mode
❸ to return to the normal display.
key
❼
Sewing machine operation under each sewing mode
(1) Normal mode (the sewing mode is set to "0",
❻
i.e., the power-on state)
① Press the Ready key
of the feed bar/needle bar. In the case memory switch
No. 12 "Cloth set position selection" is set to "front", the
feed bar travels to the near set position (memory switch
No. 23). The cloth open mechanism is closed.
"6-7. When dropping of the knife is temporarily not
– 46 –
❶
to turn it OFF.
❸ to display the mode setting
❼ to display "oPEn".
❶ to display the sewing
❻ or +/FORWARD key
❶ to finish setting. If you
❸ , the data you have set will
❶ to retrieve the origin
"9-2. Changing the setting position
❻ or +/