Installing The Sewing Machine; In The Case Of The Table-Fixed Type Machine Head - JUKI MEB-3810N Series Instruction Manual

3-5. Installing the sewing machine

WARNING :
The sewing machine has to be carried by four or more workers.
Carry out the installation work on a level place.

(1) In the case of the table-fixed type machine head

❶
1)
2)
3)
❾
1. Lift the sewing machine head with four or more people by holding the sections marked with
dotted circle as shown in the figure.
2. Do not hold the underside of hinge stopper, bottom cover, and feed base.
Hinge stopper
❶
Under-
Paper
side
liner
A
4)
❾

Feed base
Bottom cover
1) Remove the paper liners from four bolt rubbers B
❶. Place and adhere the liners over the holes in
the table. (Place the bolt rubber B with its convex
side faced downward.)
2) Place the sewing machine on
3) Remove four setscrews ❾.
4) Put air tubes and cords coming
5) Install INT cover  with four
5)
Air tube
Cord
– 9 –
the top surface of the table in
such a way that the concave
sections A of the bottom cover
fit on bolt rubbers B ❶.
Remove INT cover .
from the sewing machine head
into the hole in the table.
setscrews ❾.

❾
❾