Chrysler Sebring 2004 Service Manual page 1091

9 - 164 ENGINE 2.7L DOHC
AIR CLEANER ELEMENT
REMOVAL
(1) Disconnect negative battery cable.
(2) Disconnect inlet air temperature sensor electri-
cal connector (Fig. 7).
Fig. 7 INLET AIR TEMPERATURE SENSOR
(3) Disconnect fresh air makeup hose from throttle
body air inlet hose (Fig. 8).
Fig. 8 MAKE UP AIR HOSE
(4) Loosen hose clamp at throttle body (Fig. 9).
Remove hose from throttle body.
Fig. 9 HOSE CLAMP
(5) Push in on locking tabs to disengage air inlet
hose from air cleaner housing. Pull air inlet hose out
far enough to disengage air cleaner element from
hose with screwdriver (Fig. 10).
Fig. 10 AIR FILTER TO HOSE
(6) Remove throttle body air inlet hose.
(7) Remove air cleaner element from air cleaner
housing.
JR