4. Getting Started
• You can also log in to the machine by pressing [Login Using Keyboard] and entering your login
user name and password.
Logging Out Using an IC Card
Log out from the machine by waving your IC card over the machine when Quick Card Authentication is
specified.
• Wave only one IC card over the machine at a time.
1.
Wave your IC card over the NFC card reader.
You will log out from the machine.
• You can also log out from the machine by pressing [Logout] in the top right corner of the screen.
Using a Smart Device to Log in to the MFP
When operating a machine for which user authentication is specified, you can log in to the machine
without entering a user name and password by holding your smart device near its operation panel.
For details about RICOH Smart Device Connector, see the manuals for RICOH Smart Device Connector.
• To use this function, enable the Quick Card Authentication function and Bluetooth Authentication
Plugin.
• Register the smart device to the MFP using the Quick Card Authentication function before using this
function.
• If the machine's Bluetooth setting is enabled and Quick Card Authentication is set to "Bluetooth",
you can log in to the machine by holding a smart device over the operation panel.
138
DWP047