Ricoh Pro C7200S Operator's Manual page 436

11. Troubleshooting
Message
"Cannot print because both
the main and designation
(chapter) sheets are set to
the same paper tray. Press
[Job Reset] to cancel the
job. To print the job again
specify different trays."
When using direct print from a memory storage device
Message
"Exceeded the limit value
for total data size of the
selected files. Cannot select
more files."
"Unable to access the
specified memory storage
device."
434
Cause
The tray selected for other
pages is the same as the one
for slip sheets.
Cause
• The size of the selected
file exceeds 1 GB.
• The total size of the
selected files exceeds 1
GB.
• An error occurred when
the machine accessed
the memory storage
device or a file stored
on the memory storage
device.
• An error occurred when
the user used the Direct
printing function to print
from a memory storage
device.
Solution
Reset the job. Be sure the tray you
select for slip sheets is not providing
paper for other pages.
Solution
Files or groups of files larger than 1 GB
cannot be printed.
• When the total size of the multiple
files that are selected exceeds 1
GB, select files separately.
• When the size of the selected file
exceeds 1 GB, print from a
memory storage device using a
function other than the Direct
printing function.
You cannot select files of different
formats at the same time.
Save the file to a different memory
storage device, and then print again.