Ricoh Pro C7200S Operator's Manual page 503

When Mc7 or Mc8 is displayed
• Open the front right • Fully remove the unit by
cover of the ring binder.
• Pull down lever Mc7.
• Remove any jammed
bound booklets from
the paper exit.
When Mk1 or Mk2 is displayed
• Open the interposer
and Mk1 covers.
• Remove any jammed
pulling on handle Mc8.
• Return the unit to its
• Return lever Mc7 to its
• Open the Mk2 cover, • Close the Mk2, Mk1, and interposer covers.
and then remove
• Remove paper if the display reports a paper
misfed paper.
• Remove any bound
paper. booklets that are inside
the machine.
original position. • Close the front right
cover of the ring binder.
original position.
jam in Mk3 - Mk5.
Clearing Misfeeds
DFG007
CXG010
501