Ricoh Pro C7200S Operator's Manual page 373

1. Press [Manual Entry].
2. Press [FTP].
3. Press [Manual Entry] on the right side of the server name field.
4. Enter a server name.
Instead of the server name, you can also use its IPv4 address.
5. Press [OK].
6. Press [Manual Entry] on the right side of the path field.
7. Enter the path for the folder.
The following is an example of a path where the folder name is "user" and the subfolder name is
"lib": user\lib.
8. Press [OK].
9. Enter the user name according to the setting at the destination.
Press [Manual Entry] to the right of the user name field to display the soft keyboard.
10. Enter the password according to the setting at the destination.
Press [Manual Entry] next to the password field to make the soft keyboard appear.
11. To change the port number which is set in [System Settings], press [Change] on the right
side of the port number field. Enter a port number using the number keys, and then press
the [ ] key.
12. Press [Connection Test].
A connection test is performed to check whether the specified folder exists.
If the message "Cannot find the specified path. Please check the settings." appears, see page 446
"Messages displayed on the control panel when you use the scanner function".
13. Check the connection test result, and then press [Exit].
14. Press [OK].
• The connection test may take time.
Sending Files to a Shared Network Folder
371