Ricoh Pro C7200S Operator's Manual page 280

7. Adjustment Settings for Operators
No.
0501 Execute Process
Adjustment
0502 Screw-on Cap to Replace
0503 Execute Charge Roller
Cleaning
0507 Execute Developer
Refreshing
0509 Smooth Fusing Belt
0510 Fusing Belt Smoothing
Setting
0511 Fuser Unit Speed
Adjustment
0514 Temperature / Humidity
Inside
0515 Temperature / Humidity
Outside
0517 Switch Print Screen
0519 Display Parts Life Counter
Finishing: Finisher
For details about the following items, see page 303 "Finishing: Finisher".
278
Item
Execute the following adjustments for printing at once:
• image density, color deviation, charge roller
cleaning, charge bias, and transfer current
correction
Close the Toner Bottle Cap.
Open the toner bottle cover (the cover of the toner
dispensing section) before executing this function.
Afterward, remove the toner bottle by pushing the knob
below the bottle.
Cleans the Charge Roller.
Replace some of the liquid developer in the development
unit.
Smooth the Fuser Belt to remove vertical and horizontal
lines from the printouts.
Specify the condition to execute Fuser Belt smoothing.
Correct the deviation in the rotation speed of the Fuser
Unit.
Display the internal temperature and humidity.
Display the external temperature and humidity.
Select the mode that appears when [To Print Screen] is
pressed: copier mode or printer mode.
Display the usage rate of the spare parts.
Description