Ricoh Pro C7200S Operator's Manual page 465

Message
"Internal cooling fan is
active."
"Self checking..."
When there is a problem scanning or storing originals
Message
"Cannot detect original size.
Select scan size."
"Captured file exceeded
max. number of pages per
file. Cannot send the
scanned data."
Cause
Large print runs will cause
the machine's interior to heat
up, triggering the cooling
fan.
The machine is performing
image adjustment
operations.
Cause
The machine failed to detect
the size of the original.
The maximum number of
pages per file has been
exceeded.
When Messages Appear
Solution
The fan will emit noise, but this is
normal and the machine will be
operable while the fan is running.
The amount of paper that can be
printed and the total operation time
until the fan starts running depends on
the temperature of the location at
which the machine is installed.
The machine may perform periodic
maintenance during operations. The
frequency and duration of
maintenance depends on the humidity,
temperature, and printing factors such
as number of prints, paper size, and
paper type. Wait for the machine to
resume operation.
Solution
• Place the original correctly.
• Specify the scan size, and then
place the originals again.
• When placing an original directly
on the exposure glass, the lifting/
lowering action of the ADF
triggers the automatic original
size detection process. Lift the
ADF 30 degrees or more.
Reduce the number of pages in the
transmitted file, and then resend the
file. For details about the maximum
number of pages per file, see "Storage
function", Preparation.
463