Ricoh Pro C7200S Operator's Manual page 85

18. Two-tray wide LCT
Holds up to 4,800 sheets of paper. You can load paper whose sizes are up to SRA3 or 13 × 19
connect up to three two-tray wide LCTs.
19. Bridge unit of two-tray wide LCT
Connects a two-tray wide LCT to an additional two-tray wide LCT.
20. Banner sheet tray of two-tray wide LCT
Allows you to load large-sized paper in the two-tray wide LCT.
• You cannot install multiple finishers simultaneously.
• You cannot install the three-tray wide LCT and the two-tray wide LCT simultaneously.
• If you have connected two high capacity stackers, you cannot install the multi-folding unit, the ring
binder, or the perfect binder.
• You can install the multi-folding unit only if either Finisher SR5050 or Booklet Finisher SR5060 is
installed.
• You can install the ring binder or the perfect binder only if one of the following options is installed:
Finisher SR5050, Booklet Finisher SR5060, or the high capacity stacker.
• You can install the trimmer only if Booklet Finisher SR5060 is installed.
• You can install the high capacity stacker only if the decurl unit is installed.
• You cannot install the ring binder and perfect binder simultaneously.
• The multi bypass tray (Tray A) can be attached only if either the three-tray wide LCT or the two-tray
wide LCT is installed. However, you can attach the multi bypass tray (Tray A) to the two-tray wide
LCT only if the multi bypass attachment kit is installed.
Removing prints from finisher during printing
This section describes how to suspend a large copy or print job when using the finisher.
Depending on the image you are copying or printing, prints might not stack properly. If this happens,
suspend the job, remove the prints and then restart the job.
Guide to Functions of the Machine's Options
1
/ . You can
5
83