When Messages Appear; When Messages Appear And The Machine Cannot Be Operated - Ricoh Pro C7200S Operator's Manual

When Messages Appear

This section describes the machine's main messages. If other messages appear, follow their instructions.

When Messages Appear and the Machine Cannot Be Operated

Message
"Please wait."
"Please wait."
"Please wait."
Cause
This message appears when
you press the [Energy Saver]
key or the [Check Status]
key.
This message appears when
the machine is warming up.
This message appears when
you change the toner
cartridge.
When Messages Appear
Solution
Wait for a while. If the machine is not
ready in 5 minutes, turn off the power
and make sure the main power
indicator turns off. Wait at least 10
seconds, and then turn on the power
again. If the machine is still not ready
in 5 minutes, contact your service
representative.
• Wait for a while. If the machine is
not ready in 5 minutes, turn off the
power and make sure the main
power indicator turns off. Wait at
least 10 seconds, and then turn
on the power again. If the
machine is still not ready in 5
minutes, contact your service
representative.
• Wait until the message
disappears. Do not turn off the
power while the message is
showing.
Wait for a while. If the message does
not disappear in 5 minutes, turn off the
power and make sure the main power
indicator turns off. Wait at least 10
seconds, and then turn on the power
again. If the message remains
displayed for more than 5 minutes,
contact your service representative.
425