Ricoh Pro C7200S Operator's Manual page 343

*1 A guide for aligning output sheets when they are ejected and delivered to the stacker. The guide is
located inside the stacker.
0903 Paper Alignment in Stacker Tray: With Feed
Adjust the alignment position of the Tip Stopper when output sheets are ejected on the Stacker.
Use the function to reduce the dispersion of paper orientation in the feeding direction due to paper size,
thickness, curl and so on.
Press [ ] or [ ] to decrease or increase the amount of movement.
Setting Items
A3 SEF
B4 JIS SEF
A4 LEF
A4 SEF
B5 JIS LEF
B5 JIS SEF
A5 LEF
A5 SEF
11 × 17 SEF
1
8 / × 14 SEF
2
1
8 / × 11 LEF
2
1
8 / × 11 SEF
2
1 1
5 / × 8 / LEF
2 2
1 1
5 / × 8 / SEF
2 2
Other Paper Sizes
0904 Ppr Align in 2nd Stack Tray: Acr Feed 1
Adjust the alignment width in Main Jogger
Use the function to reduce the dispersion of paper orientation at a right angle due to paper size,
thickness, curl and so on.
Press [ ] or [ ] to increase or decrease the width.
Default Max.
Value Value
0.0 1.0
*1
when output sheets are stacked on the 2nd stacker.
Setting Values
Min.
Step
Value
-1.0 0.1 mm
Unit
341