Ricoh Pro C7200S Operator's Manual page 281

No. Item
0601 Staple Position: Across
Feed 1
0602 Staple Position: Across
Feed 2
0603 Staple Position: With Feed
0604 Paper Alignment for
Stapling: Across Feed
0605 Paper Alignment for
Stapling: With Feed
0606 Number of Sheets Align for
Stapling
0607 Punch Position: Across
Feed
0608 Punch Position: With Feed
0609 Punch Skew Correction
0610 Amount of Punch Skew
Correction
0611 Paper Alignment in Shift
Tray Setting
0612 Paper Alignment in Shift
Tray: Across Feed
0613 Output Tray Descending
Position
Description
Adjust the vertical position of the staple (applied at an
edge) when using Finisher SR5050 or Booklet Finisher
SR5060.
Adjust the vertical distance (up and down) between the
staples (dual) when using Finisher SR5050 or Booklet
Finisher SR5060.
Adjust the horizontal position of the staples when using
Finisher SR5050 or Booklet Finisher SR5060.
Adjust the width of the Staple Jogger
staple function on Finisher SR5050 or Booklet Finisher
SR5060.
Adjust the Tip Stopper movement when using the staple
function applied at an angle on Finisher SR5050 or
Booklet Finisher SR5060.
Specify the number of sheets to align for stapling at one
time.
Adjust the vertical position of the punch holes when using
Finisher SR5050 or Booklet Finisher SR5060.
Adjust the horizontal position of the punch holes when
using Finisher SR5050 or Booklet Finisher SR5060.
Specify whether or not to correct the punch skew when
using Finisher SR5050 or Booklet Finisher SR5060.
Adjust the level of skew correction when using Finisher
SR5050 or Booklet Finisher 5060.
Specify the alignment precision of output sheets during
Shift Sorting when using Finisher SR5050 or Booklet
Finisher SR5060.
Adjust the width of Paper Alignment Jogger
Shift Tray when sheets are ejected and delivered to the
Shift Tray of Finisher SR5050 or Booklet Finisher 5060.
Specify the tray descent range according to the paper
weight when sheets are ejected and delivered to the Shift
Tray of Finisher SR5050 or Booklet Finisher SR5060.
Menu Items and Functions
*1
when using the
*1
on the
279