When You Have Problems Operating The Machine - Ricoh Pro C7200S Operator's Manual

11. Troubleshooting
Problem
Documents and reports do
not print out.
An error has occurred.

When You Have Problems Operating the Machine

Problem
The machine does not turn
on.
When the machine is turned
on, the only icon that
appears on the home screen
is the [Copier (Classic)] icon.
The machine has just been
turned on and the User Tools
screen is displayed, but the
User Tools menu has items
missing.
The indicator lamp remains
lit and the machine does not
enter Sleep mode even
though the [Energy Saver]
key was pressed.
The display is turned off.
416
Cause
The paper output tray is full.
A item with the status "Error
Occurred" in the [Check
Status] screen is defective.
Cause
The AC power switch has
not been turned on.
Functions other than the
copier function are not yet
ready.
Functions other than the
copier function are not yet
ready. Time required varies
by function. Functions
appear in the User Tools
menu when they become
ready for use.
In some cases, the machine
does not enter Sleep mode
when the [Energy Saver] key
is pressed.
The machine is in Low Power
mode.
Solution
Remove the prints from the tray.
Press [Check] in the item where the
error has occurred. Then read the
displayed message, and take the
appropriate action. For details about
error messages and their solutions, see
page 425 "When Messages Appear".
You can use other functions normally.
Solution
Turn on the AC power switch. For
details about the AC power switch, see
page 519 "General Requirements".
Wait a little longer.
Wait a little longer.
Before you press the [Energy Saver]
key, check that Sleep mode can be
enabled. For details about enabling
Sleep mode, see page 92 "Saving
Energy".
Press the [Check Status] key to cancel
Low Power mode.