Ricoh Pro C7200S Operator's Manual page 309

Use the function to reduce the dispersion of paper orientation at a right angle due to paper size,
thickness, curl and so on.
Press [ ] or [ ] to increase or decrease the width.
Setting Items
A3 SEF
B4 JIS SEF
A4 LEF
A4 SEF
B5 JIS LEF
B5 JIS SEF
11 × 17 SEF
1
8 / × 14 SEF
2
1
8 / × 11 LEF
2
1
8 / × 11 SEF
2
8K SEF
16K LEF
16K SEF
Other Paper Sizes
*1 A guide for aligning output sheets when using the stapling function. The guide is located inside the
finisher.
0605 Paper Alignment for Stapling: With Feed
Adjust the Tip Stopper movement when using the staple function applied at an angle on Finisher
SR5050 or Booklet Finisher SR5060.
Use the function to reduce the dispersion of paper orientation in the feeding direction due to paper size,
thickness, curl and so on.
Press [ ] or [ ] to increase or decrease the amount of movement.
Default Max.
Value Value
0.0 1.0 -1.0
Setting Values
Min.
Step
Value
0.1 mm
Unit
307