Ricoh Pro C7200S Operator's Manual page 511

When Rb6 – Rb9 is displayed (when Booklet Finisher SR5060 is installed)
• Open the finisher front
cover.
• Lower lever Rb6.
• Remove misfed paper.
• Close the finisher front cover.
When Rb10 – Rb17 is displayed (when Booklet Finisher SR5060 is installed)
• Open the finisher front
cover.
• Turn knob Rb10.
• Turn knob Rb14, and
then remove misfed
paper.
• Pull lever Rb7 to the
left.
• Turn knob Rb11 9 to
11 times.
• Lower lever Rb15,
and then turn knob
Rb16.
• Remove misfed paper.
• Turn knob Rb8, and • Pull lever Rb9 to the
then remove misfed
paper.
• Return levers Rb6
and Rb7 to their
original positions.
• Pull handle Rb12, and • Raise lever Rb13, and
then pull out the
staple unit.
• Return lever Rb13 to
• Raise lever Rb17, and then remove misfed
paper.
• Return lever Rb17 to its original position.
• Return the staple unit to its original position,
and then close the finisher front cover.
Clearing Misfeeds
left.
CXG023
then remove misfed
paper.
its original position.
CXG024
509