Ricoh Pro C7200S Operator's Manual page 37

Notes on configuring the fold function
Conditions where fold function will be canceled
Fold function will be canceled when:
• Paper size or type which is not compatible with the fold function is selected.
• The machine is made to continue printing manually.
• [Auto Continue] is set.
• A paper type on which Multi-sheet Fold cannot be applied is selected.
• Multi-sheet Fold is specified but the paper sizes are different.
• Multi-sheet Fold is specified but the number of sheets exceeds the maximum number available
for the fold function.
• A combination of paper orientation and fold position that cannot be folded is selected.
• Paper is fed from an optional interposer.
• Multi-folding unit is not installed.
Functions that will cause job reset to occur when combined with the fold function
*1
• Slip Sheets
• Separation Sheets
*2
• Staple
• Punch
• Ring Binding
• Perfect Binding
• Half Fold configured on the Booklet Finisher
*1
Job reset occurs only when combined with Half Fold, Letter Fold-in, Letter Fold-out, Double
Parallel, or Gate Fold.
*2
Job reset occurs only when combined with Half Fold, Letter Fold-in, Letter Fold-out, Double
Parallel, or Gate Fold. It can be specified along with Z-fold except when Staple (Center) is selected
(using the Booklet Finisher).
Functions that will be canceled when combined with the fold function
The following functions will be canceled when specified with Booklet Binding at the same time:
• Stack
• Extended Auto Tray Switching
• Ejecting paper with the printed side facing up
• If the information icon (
function. Click the information icon (
*1
/ ) is displayed next to the "Fold:" list, you cannot specify fold
/ ) to check why fold function is unavailable.
Fold
35