11. Troubleshooting
Problem
Copies are not stapled.
Copies are not stapled.
Saddle-stitched documents
come apart and do not stack
properly.
Staples are wrongly
positioned.
Stapled sheets of paper are
not output during printing.
480
Cause
Copy paper is curled.
The number of copies is too
large for the stapler to staple
the copies as a single batch.
Certain types of paper are
resistant to folding and open
out after being folded and
stitched.
Originals are not set
correctly.
When you stop printing
while using the staple
function, paper not stapled
during printing may be left in
the staple unit.
Solution
• Turn the copy paper over in the
tray.
• Straighten the curled sheets using
[Adjustment Settings for
Operators]. For details about the
settings for [Adjust Paper Curl],
see page 271 "Adjustment
Settings for Operators".
For details about the stapler capacity,
see "Specifications for Finisher
SR5050" or "Specifications for Booklet
Finisher SR5060", Specifications.
For details about the recommended
paper, see page 207 "Recommended
Paper Sizes and Types".
For details about how to place the
originals with stapling, see "Staple",
Basic Operations.
Press the [Stop] key, and then cancel
copy settings, including stapling.