Changing The Paper Size In The Three-Tray Wide Large Capacity Tray - Ricoh Pro C7200S Operator's Manual

8. Carefully slide the paper tray fully in.
• After sliding the paper tray in, make sure that the paper size is changed correctly on the printer's
initial screen. To display the printer's initial screen, display the [Home] screen and press the [Printer]
icon.

Changing the Paper Size in the Three-tray Wide Large Capacity Tray

• Check that the paper edges are aligned with the left side.
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Remove paper if loaded.
DER066
DER074
Changing the Paper Size
193