Finishing: Finisher - Ricoh Pro C7200S Operator's Manual

PCU Cleaning Unit (K)
Charger Unit (K)
Photoconductor Unit (K)
PCU Cleaning Unit (C)
Charger Unit (C)
Photoconductor Unit (C)
PCU Cleaning Unit (M)
Charger Unit (M)
Photoconductor Unit (M)
PCU Cleaning Unit (Y)
Charger Unit (Y)
Photoconductor Unit (Y)
PCU Cleaning Unit (S)
Charger Unit (S)
Photoconductor Unit (S)
ITB Cleaning Unit
Paper Transfer Unit
Fuser Unit

Finishing: Finisher

0601 Staple Position: Across Feed 1
Adjust the vertical position of the staple (applied at an edge) when using Finisher SR5050 or Booklet
Finisher SR5060.
Press [ ] to move the stapling position away from the side edge of the sheet or [ ] to move it toward the
edge.
Setting Items
Fusing Belt Smoothing Rlr
Fuser Cleaning Unit
Ozone Filter (Main)
Dust Filter (Main)
Tray 1
Tray 2
3-Tray LCIT: Tray 3
3-Tray LCIT: Tray 4
3-Tray LCIT: Tray 5
Bypass Tray
Interposer Upper Tray
Interposer Lower Tray
ADF
2-Tray LCIT:Tray3:Fd Blt
2-Tray LCIT:Tray4:Fd Blt
2-Tray LCIT:Tray5:Fd Blt
2-Tray LCIT:Tray6:Fd Blt
2-Tray LCIT:Tray7:Fd Blt
2-Tray LCIT:Tray8:Fd Blt
Setting Values
Description
The counter value of
the replacement part is
displayed.
When it reaches the
time to replace, a
message will be shown
to prompt the
replacement.
303