Ricoh Pro C7200S Operator's Manual page 472

11. Troubleshooting
Problem
Shadow appears on copies
if you use pasted originals.
Identical blemishes appear
in the same place on every
copy.
Identical blemishes appear
in the same place on every
copy.
The shadow density of an
area is different from that of
the original.
Copies are too light.
470
Cause
Image density is too high.
The exposure glass,
scanning glass, or guide
plate of the ADF is dirty.
• The original that has
already been printed is
scanned.
• Original Type is set to
[Text / Photo], and an
original with text and
photographs that can
hardly be distinguished
from each other is
loaded.
If Original Type is set to
[Text / Photo] for copying,
the shadow density for each
area may vary.
Image density is too light.
Solution
• Adjust the image density settings.
For details about image density
settings, see "Adjusting Copy
Image Density", Basic
Operations.
• Change the orientation of the
original.
• Use clear tape to fix down pasted
parts of the original.
Clean the exposure glass, scanning
glass, or guide plate of the ADF. For
details about how to clean the
machine, see page 534 "Maintaining
Your Machine".
On the control panel, press
[Generation Copy] to start a copy job.
On the control panel, in the original
types, press [Photo] or [Text], and then
start copying.
Adjust the image density settings. For
details about image density settings,
see "Adjusting Copy Image Density",
Basic Operations.