Adjusting The Image Position Of The Either Side Of The Paper - Ricoh Pro C7200S Operator's Manual

3. Useful Functions
Settings
Apply Auto Paper Select
Scan the Value
Update the Value
Advanced Settings
*1 Can be changed only by the machine administrator.
• Before changing these settings, check that the size and type of your paper are compatible with the
paper tray that you want to load the paper in. Tray compatibility depends on the paper's size and
type.

Adjusting the Image Position of the Either Side of the Paper

Adjusts the image position so it is the same on either side of the paper.
First, print a template and measure the length of the specified area. Next, enter the length on the
machine to adjust the position of the image.
Specify the size of each piece of paper you use. Specified settings are saved as custom paper settings,
so that you can use the registered settings next time.
You need administrator privileges to adjust the image position.
Preparations
Before adjusting image positions, perform the following:
• Skew correction with the color controller
First of all, perform skew correction with the color controller. For details, see the manuals for the
color controller.
• Print a template
After performing skew correction, print a template included on the supplied CD-ROM. Select a
template whose size is the same with the paper that includes an image whose position you want to
adjust on the machine.
• Measure the template
When you print the template, arrows are printed in the corners.
60
Custom papers that have been
registered using the master library
(listed with an icon or
Available
Available
Available
*1
Available
Custom papers that have been
registered by specifying paper
) types and weight ( )
Available
Not Available
Available
Available
*1