Ricoh Pro C7200S Operator's Manual page 487

Problem
Images are not printed in the
specified colors.
Color images are printed in
black and white.
Images appear only
partially.
The image on the back side
of duplex copies has mottled
blank patches or is
smudged.
When paper is not fed properly
Problem
Paper is not fed from the
selected tray.
Cause
The correct printer driver
settings are not made.
No color print settings are
made on the printer driver.
The paper is damp.
Missing patches and
smudges are caused by
moisture leaking from the
paper.
Cause
When you are using a
Windows operating system,
printer driver settings
override those settings
applied to the display panel.
Troubleshooting When You Use the Printer Function
Solution
If it is only one particular color that
does not print, turn off the main power
switch, and back on again. If the
problem persists, contact your service
representative.
Change the "Color/ Black and White:"
setting on the printer driver. For details
about how to change the "Color/
Black and White:" setting, see the
printer driver Help.
Use paper that has been stored in the
recommended temperature and
humidity condition. For details about
the paper storage conditions we
recommend, see page 240 "Paper
Storage".
• Do not install the machine in low-
temperature areas.
• Use paper that has been stored
where temperature and humidity
conditions meet the conditions we
recommend. For details about the
paper storage conditions we
recommend, see page 240
"Paper Storage".
Solution
On the Printer driver's [Detailed
Settings] tab, click [Paper] in "Menu:",
and then select the input tray you want
to use in the "Input Tray:" list.
485