Ricoh Pro C7200S Operator's Manual page 282

7. Adjustment Settings for Operators
No.
0614 Exit Guide Close Timing
0615 Output Trail Edge Press
Setting
0616 Output Fan Setting
0617 Output Fan Level
0618 Staple Position for Booklet
0619 Folding Position for Booklet
0620 Paper Alignment for
Booklet: Across Feed
0621 Set Number of Folds for
Booklet
0622 Paper Alignment for
Booklet: With Feed
0623 Z-fold Skew Correction
0624 Amount of Z-fold Skew
Correction
0625 Amount of Z-fold Skew
Correction: Reverse
0626 Maximum No. Stacked
Sheets in Output Tray
*1 A guide for aligning output sheets. Paper is aligned at both ends.
280
Item
Specify the timing to close the Paper Exit Guide when
sheets are ejected and delivered to the Shift Tray of
Finisher SR5050 or Booklet Finisher SR5060.
Specify whether or not to hold the trailing edge of sheets
when they are ejected and delivered to the Shift Tray of
Finisher SR5050 or Booklet Finisher SR5060.
Specify the fan operation to the sheets on the Shift Tray
when sheets are ejected and delivered to the Shift Tray
of Finisher SR5050 or Booklet Finisher 5060.
Specify the air flow of the fan on the Shift Tray when
sheets are ejected and delivered to the Shift Tray of
Finisher SR5050 or Booklet Finisher 5060.
Adjust the horizontal position of the booklet staples when
using Booklet Finisher SR5060.
Adjust the horizontal position of the folding when using
Booklet Finisher SR5060.
Adjust the width of the Staple Jogger
Booklet Finisher SR5060.
Specify the number of booklet folds to be performed
when using Booklet Finisher SR5060.
Adjust the Tip Stopper movement when using the booklet
binding function on Finisher SR5050 or Booklet Finisher
SR5060.
Select the method to correct the skew during Z-folding on
the fold unit.
Adjust the striking amount of paper during Z-folding
skew correction.
Adjust the reverse rotation amount of Registration Roller
during Z-folding skew correction.
Specify the number of sheets to stack on the Shift Tray at
the time of shift sorting.
Description
*1
when using