Troubleshooting When You Use the Copy/
Document Server Function
This chapter describes likely causes of and possible solutions for Copier and Document Server function
problems.
When You Cannot Make Clear Copies
Problem
Copies appear dirty.
Copies appear dirty.
The reverse side of an
original image is copied.
The reverse side of an
original image is copied.
The reverse side of an
original image is copied.
Troubleshooting When You Use the Copy/Document Server Function
Cause
Image density is too high.
Auto Image Density is not
selected.
Image density is too high.
Auto Image Density is not
selected.
The original is thin.
Solution
Adjust the image density settings. For
details about image density settings,
see "Adjusting Copy Image Density",
Basic Operations.
On the control panel, select [Auto
Density].
Adjust the image density settings. For
details about image density settings,
see "Adjusting Copy Image Density",
Basic Operations.
On the control panel, select [Auto
Density].
On the control panel, select [Auto
Density], or adjust the image density
settings.
For details about image density
settings, see "Adjusting Copy Image
Density", Basic Operations.
469