Ricoh Pro C7200S Operator's Manual page 279

No.
0301 3-Tray LCIT: Fan Setting
0302 3-Tray LCIT: Fan Volume
Setting
0303 Pickup Assist Setting
0304 Correct Output Paper Curl
0305 Detect JAM099
0306 Detect JAM080
0307 Detect/Control
JAM097/098
0308 Detect JAM048
0310 ADF Adjustment
0311 Buffer Pass Unit Fan
Activation Setting
Machine: Maintenance
For details about the following items, see page 298 "Machine: Maintenance".
Item
Specify the fan operation of the 3-Tray LCIT.
Adjust the fan volume for the 3-Tray LCIT to separate
sheets of paper in close contact.
Specify the operation of the Paper Feed Roller in the
trays of the main unit, bypass tray, and 3-tray LCIT.
Specify the method for straightening curled sheets.
Select the method according to the direction and degree
of curl.
Specify whether or not to detect double feed (multi-sheet
feeding). This setting is invalid when you are printing
from the tray for which custom paper is allocated.
Specify whether or not to detect error as a paper jam
when the image deviation in the feeding direction
exceeds a certain degree.
Specify whether or not to correct the image position and
skew in the vertical direction when a deviation in the
direction is detected.
Specify whether or not to detect an error as a paper jam
when a problem is detected while the registration mark
is checked for image position correction.
Adjust the image position and scaling factor when
scanning originals on the Auto Document Feeder (ADF).
You can correct the discrepancy, stretching, and
shrinkage of originals caused by deviation during the
feeding process.
Select the condition for activating the fan in the Cool
Feeding Unit. When the fan stops, the mechanical noise
is lower.
Menu Items and Functions
Description
277