Ricoh Pro C7200S Operator's Manual page 60

3. Useful Functions
Coated Paper Type
Specify whether or not the custom paper is coated. The type of coating finish (other than matte
paper) can also be scanned using the Media Identification Unit.
Paper Color
Specify the color of the custom paper.
Prepunched
Specify whether or not the custom paper is punched.
Textured
Specify whether or not the custom paper is embossed.
Apply Duplex
Specify whether the duplex function is enabled for the custom paper.
Apply Auto Paper Select
Specify whether the auto paper select function is enabled for the custom paper.
Auto Adjust Image Position
Perform automatic adjustment of the print position on the front side or both sides of white custom
paper allocated to the tray. Use the following procedure to perform adjustment:
1. When adjusting the print position on the front side, load six sheets of paper in the
tray. Load 11 sheets when adjusting for both sides.
2. Press [Adjustment] for "Front Side Registration" or "Front & Back Registration".
Adjustment is performed by printing five sheets for adjusting the front side or 10 sheets for
adjusting the front and back sides, and one sheet for confirming the adjustment result.
3. Check the adjustment result, and press [Apply].
The setting value that reflects the adjustment result is applied.
• To check the print position only, load a sheet of paper in the tray, and then press [Test
Print] under [Test Print (Front)] or [Test Print (Front & Back)].
• Adjust the print position using [Manual Adjust Image Position] or [Registration to Align
Front and Back Images Using Template] when adjusting the print position on non-white
custom paper, or if a satisfactory adjustment result could not be obtained using [Auto
Adjust Image Position]. For details about using [Registration to Align Front and Back
Images Using Template] for adjustment, see page 60 "Adjusting the Image Position of
the Either Side of the Paper".
Manual Adjust Image Position
Adjust the print position manually on the custom paper allocated to the tray. For details, see
page 271 "Adjustment Settings for Operators".
58