Ricoh Pro C7200S Operator's Manual page 420

11. Troubleshooting
Problem
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
418
Cause
Using curled paper often
causes misfeeds, soiled
paper edges, or slipped
positions while staple or
stack printing is performed.
The tray's side or end fences
may not be set properly.
Paper of undetectable size
has been loaded.
Solution
• Flatten the paper with your hands
to straighten out the curl.
• Load the paper up side down so
that the curled edges face
downward. For details about
recommended paper, see
page 207 "Recommended
Paper".
• Place the cut paper on a flat
surface to prevent it from curling,
and do not lean it against the
wall. For details about the proper
way to store paper, see
page 240 "Paper Storage".
• Remove the misfed paper. For
details about removing jammed
paper, see page 495 "Removing
Jammed Paper".
• Check that the side or end fences
are set properly. Also, check that
the side fences are locked. For
details about setting the side and
end fences, see page 190
"Changing the Paper Size".
• Remove the misfed paper. For
details about removing jammed
paper, see page 495 "Removing
Jammed Paper".
• If you load a paper size that is not
selected automatically, you need
to specify the paper size with the
control panel. For details about
specifying paper size using the
control panel, see page 205
"Changing to a Size That Is Not
Automatically Detected".