Table of Contents
Advertisement
3.3 Unpacking
Platform
The platform comes packed in a wooden crate, mounted on a pallet, with wooden covers. See
the following figure.
The docking station, joystick, and platform are shipped in the same crate.
Retain all parts and fasteners removed for possible repacking.
1. Remove the two Klimp clips from the front panel and back of the crate at the bottom.
2. Remove the two lag screws at the bottom of each end of the crate cover.
3. Undo the four spring-loaded latches and remove the front panel of the crate.
28
Figure 3-2. Front Panel of Shipping Crate
Figure 3-3. Lag Screw at Bottom of Crate End
LD Platform OEM User's Guide
11970-000 Rev H1
Advertisement
Table of Contents
