Hd-1500 Platform Modifications - Omron HD-1500 Platform User Manual

Towing applications.
l
Personnel riding vehicle.
l
IMPORTANT: The HD-1500 is not intended to be used with a battery that is not
supplied by OMRON. Additionally, it is not intended to be charged by any
charger other than the OMRON charging station.
Non-intended use of an HD-1500 can:
Cause injury to personnel.
l
Damage the HD-1500 or other equipment.
l
Reduce reliability and performance.
l
If there is any doubt concerning the application, contact your OMRON representative for sup-
port.

HD-1500 Platform Modifications

OMRON recognizes that end-users or integrators make modifications to the HD-1500 to adapt
it to a specific application. When doing so, make sure that:
You use the User Safety Interface connection located on the user access panel, to include
l
appropriate safety devices into the HD-1500's integrated safety systems. See: SCPU on
page 161.
The modification causes no hazardous sharp edges, corners, or protrusions and does
l
not extend further than the HD-1500 footprint. If the modification causes extension bey-
ond the HD-1500 footprint, you must contact your OMRON representative for assist-
ance with modifying the safety zones.
The final design of the HD-1500 meets all relevant local and national safety standards,
l
and requirements for the new intended use.
There is no reduction in functionality.
l
All safety features (such as lasers and brakes) are functional and operate within the spe-
l
cifications determined by local product safety standards for AMRs.
You add additional safety features if determined to be necessary based on risk assess-
l
ment results.
You perform proper risk assessment in accordance with EN ISO 12100, and identify any
l
risks associated with the modification made to the HD-1500 platform. It is the end-
user's responsibility to ensure that these risks are properly mitigated/eliminated, so the
AMR does not cause personal injury or property damage.
31500-000 Rev A HD-1500 Platform User's Manual
Chapter 2: Safety
48