Viewfinders; Camera Control Unit; The Ccu-700A/700Ap Has The Following Features; The Ccu-550D/550Dp Has The Following Features - Sony BVP-E10 Series Product Information Manual

2-3.

Viewfinders

For hand held or on-the-shoulder applications, there
are two types of monocular black and white CRT
viewfinders. The BVF-20W (NTSC)/ 20WCE (PAL) is a
true wide screen 2-inch (16:9 aspect ratio) viewfinder,
while the BVF-10 (NTSC)/ 10CE (PAL) is a 1.5-inch 4:3
standard viewfinder. Both provide high resolution of
600 TV lines at centre. For studio and OB applications,
the BVF-55/ 55CE, a 5-inch monochrome viewfinder, is
2-4.

Camera Control Unit

The CCU-700A/700AP is a camera control unit for use
with BVP-E10 Series cameras. By incorporating
wideband Triax transmission , three optional SDI
outputs, and a digital control system, as well as, the
CCU-700A/700AP offers maximum camera
performance combined with flexible operation. It has
been designed to achieve the highest reliability, afford
easy maintenance and allow flexible system
configuration.
The compact Camera Control Unit, CCU-550D/
550DP, is also available for use with BVP-E10 Series. A
compact body, two SDI outputs and optional 12 V DC
operation (BKP-5974) make this unit ideal for field use.
The CCU-900/900P Fibre Optic Camera Control Unit
is for applications where even longer cable runs are
required. Used together with the CA-950/950P fibre
adaptor, the CCU-900/900P provides full digital
transmission using hybrid copper/fibre cables.
Transmission distances of up to 3,000 metres are
possible without degradation, including camera power
and return viewfinder signals. Even longer distance
transmission up to 10,000 metres is possible if power
is supplied locally to the camera.
2-4-1
Wideband triax transmission
• 10 MHz luminance channel for high performance
transmission; 6 MHz for each colour difference
signals
• Up to 2000 m cable length (with φ 14.5 mm cable)
• Up to 1200 m cable length (with φ 11.0 mm cable)
• Up to 1,000 m cable length (with φ 8.5 mm cable)
• Return video (up to 2000 m with φ 14.5 mm cable,
1200 m with φ 11.0 mm cable, and 1,000 m with φ 8.5
mm cable)
• Prompter video (up to 1000 m with φ 14.5 mm cable,
625 m with φ 11.0 mm cable, and 500 m with φ 8.5 mm
cable)
Easy-to-operate command system
• Immediate response
• Wide range of remote controls
Mono colour function
Mono colour video is available to VBS and Y, R-Y and
B-Y outputs
All colour information in the picture is replaced by a
single colour, for which the hue (360 degrees) and
saturation can be controllable from an MSU-700A/
750A/750 Master Set-up Unit
The CCU-700A/700AP has the
following features:
available. If the camera is used with the CA-905K/F/L
large lens adaptor and BKP-5097 viewfinder cradle, a
larger 7" viewfinder can be used. The BVF-77/77CE is
a high performance 7-inch monochrome viewfinder
with extremely high horizontal resolution. All of these
models are very compact in size, light in weight and
economical in power consumption.
Character display
• Self diagnostics and other information may be
displayed on a monitor or superimposed on the
picture monitoring output
• Characters, such as the camera number, can be
superimposed on the internal colour bar signal
Component SDI output (option)
Three component SDI outputs are optionally available
for interfacing to the ever increasing range of
component digital equipment and facilities
Built-in contrast and saturation functions
Contrast, saturation and chroma on/off controls
provided
Flexible intercom system
Individual channels for production and engineering
talkback
4W, 2W or RTS selectable by internal switch
Remotely controllable MIC input gain (camera head)
The gain of the two camera head programme
microphone inputs is remotely controllable from the
CCU in 10 dB steps (-60 dB ~ -20 dB). Control is also
available via a connector on the rear of the CCU
Flicker-less sequential mode (RGB) standard for WFM
output
RGB sequential monitoring without flicker
Compact size and easy maintenance
• 19-inch wide and 3U high, including camera power
supply unit
• Plug-in boards and plug-in power supply unit for
easy maintenance
2-4-2 The CCU-550D/550DP has the
following features:
Wide variety of system configurations
Two SDI signal outputs (digital component video each
with two channels of embedded audio) may be used.
When equipped with the optional BKP-5973 CCU
Control Panel, the BKP-5973 can be used to control
the video camera directly, without the use of a RCP-
700 Series Remote Control Panel or the RM-B150
Remote Control Unit.
Note:
The BKP-5973 does not work when the CCU-550D/
550DP is connected to the CNU-700/500 Camera
Network Unit. When the optional BKP-5974 DC Power
Unit is attached, a DC power source may be used. The
CCU-550D/550DP supports communications between
the video camera and the CCU-550D/550DP over
BVP-E10 Series Product Information Manual
Chapter 2 A Total System
21