Table of Contents
Advertisement
The BVP-750/750P can store the adjustment data
in one of the following files.
Reference file
The reference file stores the reference values used
for automatic setup adjustment and the standard
settings of the switches.
Scene files
Scene files store paint data for each scene. For
example, if you store data prepared in rehearsal for
a particular scene in a scene file, the data can be
retrieved to reproduce the same camera settings
used in rehearsal.
Lens files
Lens files store specific data for a lens to be used.
When you use a recommended lens, the standard
values are stored in a lens file at the factory.
Creation, storage and retrieval of files are
performed using an optional MSU-700 Master
Setup Unit or RCP-700-series Remote Control
Panel. The type and number of files which can be
handled depend on the unit used.
For details, refer to the System Manual.
3
Advertisement
Table of Contents
