Setting Up The Auto Iris; Auto Setup - Sony HDC-750 Operation Manual

4-5-7 Setting up the Auto Iris

The AUTO IRIS page of the OPERATION menu is
used to set up items related to the auto iris.
VF DISP switch
MENU SEL control
1
Set the VF DISP switch to MENU.
The OPERATION menu will be displayed on the
viewfinder screen.
2
Rotate the MENU SEL control to display the
AUTO IRIS page, and push the MENU SEL
control/button.
AUTO IRIS: Set to ON to use the auto iris.
WINDOW SEL: Used to select the auto iris
window.
1 2
LEVEL: Used to set the auto iris level (–99 to
+99).
APL RATIO: Used to set the auto iris effect (–99
(maximum) to +99 (standard)).
IRIS GAIN: Used to set the iris gain (–99 to +99)
IRIS CLOSE: Used to set the iris close to ON or
OFF.
3
Rotate the MENU SEL control to align the "n"
marker with the item to be changed, and push the
MENU SEL control.
The "n" marker will change into a "?" mark.
3 4 5
4
Rotate the MENU SEL control to change the
setting to the desired value, and push the MENU
SEL control/button.
The "?" mark will change back to the "n" marker
and the new setting will be saved.
5
To set the values for another items, repeat steps 3
and 4.
6
To end menu operations, set the VF DISP switch to
ON.
The menu display will disappear from the
viewfinder screen, and the status of items set to
ON will be displayed on the screen.

4-5-8 Auto Setup

The AUTO SETUP page of the OPERATION menu is
used to perform the following automatic adjustments:
• Black balance adjustment
• White balance adjustment
• Internal level adjustment
It is also used to select test signals.
To adjust the black balance or white
balance
VF DISP switch
MENU SEL control
1
Set the VF DISP switch to MENU.
Chapter 4 Adjustments and Settings for Recording
(Continued)
4-15(E)