Table of Contents
Advertisement
To add the camera's IP address to Internet Explorer's list of trusted sites:
1. Open Internet Explorer.
2. Click Tools, and then
3. Click the
Security
4. Click the
Sites
button.
5. Clear the "Require server verification (https:) for all sites in this zone box.
6. Enter the IP address in the "Add this website to the zone" field.
7. Click Add, and then click Close.
8. Click
OK
in the Internet Options dialog window.
9. Connect to the camera for full browser functionality.
Activating the camera
When you first start up the camera, the Activation window appears. You must define a
high-security admin password before you can access the camera. There is no default
password provided.
You can activate a password by using a web browser and by TruVision Device
Manager (included on the CD to find the IP address of the camera).
Activation via the web browser:
1. Power on the camera and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and click
enter the activation interface.
Note:
The default IP address of the camera is 192.168.1.70.
For the camera to enable DHCP by default, you must activate the camera via
TruVision Device Manager. Please refer to the following section, "Activation via
TruVision Device Manager".
3. Enter the password in the password field.
TruVision IP Thermal Camera Configuration Manual
Internet
Options.
tab, and then select the Trusted sites icon.
Enter
to
5
Advertisement
Table of Contents
