Picture overlay
This function lets you overlay a picture on the image, such as a company logo for
example. The picture must be in RGB24 bmp format and the maximum permitted size
is 128*128.
To add a picture:
1. From the Configuration panel, click
2. Under "Upload Picture", click
it.
3. Select
Enable Picture Overlay
Note: The X and Y coordinate values show the location of the picture on the image.
Picture width and height shows the size of the picture.
Defective pixel correction
A CCD or CMOS image sensor in a digital camera may have defective pixels, which
can fail to sense light levels correctly. The DPC (Defective Pixel Correction) function
allows the camera to correct defective pixels.
Note: This function is only available for certain camera models.
30
Configuration
Browse
to select a picture file and
check box to enable the function.
>
Image
>
Picture
Upload
TruVision IP Thermal Camera Configuration Manual
Overlay.
to upload