Table of Contents
Advertisement
To set up motion detection in normal mode:
1. From the Configuration panel, click
Detection.
2. Set the motion detection area.
a) Select the
Enable Motion Detection
Motion
if you want to see real-time motion events.
Note:
Select
want the detected object displayed in green frames.
b) Select
Normal
c) Click
Draw
Area. Click and drag the mouse on the live video image to draw an
area sensitive to motion detection.
d) Click
Stop Drawing
and restart drawing.
e) Move the
Sensitivity
have the same sensitivity level.
3. Set the arming schedule.
a) Click
Edit
to edit the arming schedule. The "Edit Schedule Time" pop-up window
appears.
b) Select the day of the week and click
copy the schedule to other days of the week by selecting the check boxes for the
desired days of the week and clicking Copy.
c) Click
OK
to save changes and to return to the motion detection window.
4. Specify the linkage method for when an event occurs.
Select one or more response methods for the system when a motion detection
alarm is triggered.
34
Configuration
Disable
under Rules in the Local Configuration menu if you do not
mode from the drop-down menu.
to finish drawing. Click
slider to set the sensitivity of the detection. All areas will
>
Basic Event
box. Select
Enable Dynamic Analysis for
Clear All
to delete all areas marked
to set the detailed time period. You can
TruVision IP Thermal Camera Configuration Manual
>
Motion
Advertisement
Table of Contents
