Interlogix TruVision TVB-5702 Configuration Manual page 57

Behavior Analysis Version
Display Information
Snapshot Settings
3. Click Save to save the settings.
TruVision IP Thermal Camera Configuration Manual
Displays the version of the algorithms library.
Displays the target information on the alarm snapshot and video
stream. Select the check boxes to enable the desired display
method.
Display Target info. on Alarm Snapshot: When enabled, a frame
of the target information is displayed on the uploaded alarm
snapshot.
Display Rule info. on Alarm Snapshot: When enabled, a frame of
the information about the captured target and the configured area
is displayed on the uploaded alarm snapshot.
Display VCA info. on Stream: A green frame is displayed on the
target when in live view or playback.
Note: "Rules" must be enabled in your local settings. Go to
Configuration > Local Configuration > Rules
option.
Set the quality and resolution for the captured snapshot.
Upload JPEG Image to Center: Select the check box to upload the
captured image to the surveillance center when a VCA alarm
occurs.
Snapshot Quality: Select High, Medium, or Low from the drop-
down list.
to enable the
55